UNIVERSAL PICKLING AGENT FOR PAINTS AND RESINS, WITHOUT CHLORINATED SOLVENTS, HIGH FLASH POINT / RAPID ACTION TIME
DECAP STRIP L has shown great performance on all paints, enamels, resins and inks.
Its formula has been developed not only to be effective on room temperature dried coatings, but also on bi-component, thermosetting and UV cured systems.
DECAP STRIP L is suitable for glycerol, cellulose based, acrylics, vinyls, aminoplasts, polyesters, phenolic based, mono and bi-component epoxies, mono and bi-component polyurethanes.
Most picklers are formulated with ethylene chloride or methyl ethyl ketone.
In addition to the criteria of non-toxicity and non-flammability, DECAP STRIP L has a high evaporation rate, less than 1 minute; thus the action times are reduced.
Its active ingredients are effective for up to 6 hours and allows the removal of highly cross-linked resins.
CHEAPER
DECAP STRIP L has a hiding power far superior to most of the classic pickling agents, thanks to its wettability, its optimized evaporation speed, and its ease of application.
DECAP STRIP L allows a reduction in the quantities used, up to 30% less than standard formulations.
MORE SAFETY
DECAP STRIP L is guaranteed without Methylene Chloride classified R 40: “Suspected carcinogenic effects – Insufficient evidence” but also, without other chlorinated solvents, without ketones, without NEP, without NMP.
It has a particularly high flash point to ensure greater safety in industrial environments.
EASY TO USE
This pickling agent can be removed later with low pressure water.
DECAP STRIP L is chemically stable, without decantation, ready for use.